How to install New UPA USB Programmer
2014 latest UPA USB Programmer is V1.2 version. New UPA USB Programmer act as the full set with all adapters, The mainly Device can be connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable.
Today I will introduce the steps of install newest UPA USB programer.
Please operate the UPA USB programmer step by step.
Step one: you can download V1.2.1.17 UUSP UPA USB programmer software for free.
Step two: Check the installation manual of UUSP UPA USB V1.2, according to the procedure,copy this file: "uuprog.lic" to C:Program FilesELRASoftUPA-USB SuiteDevice Programmer, crack V1.2.1.17 UUSP USB software.
Step three: Plug the UUSP UPA USB V1.2 into the PC, and connect the UUSP UPA with your pc, then you will find new hardware, to use the driver file of UUSP UPA progammer, install the UUSP USB hardware drive.
Step four: open the software of UPA-USB Device Programmer, and choose USB port, and the new UPA USB hardware will be found. Click -file-new-programmer, and then create the file of UUSP UPA USB programmer.
Step five: Choose the programmer model in the menu, and check the connections of chip and programmer in the menu.
Step six: Choose : "read" button, read the data from ecu tuning, "Verify" button, Verify the chip is valid? "program" button, write and program the chip. Click-file-save, finish one times demonstration of UUSP UPA USB programmer.
It is very easy to install New UPA USB Programmer. if any other question , feel free to contact our EOBD2.NET.