Tips on how to set up Launch Creader VI driver
Action just one: to update the Launch Creader VI, to start with obtain the newest update at: http://www.crecorder.com.
Essential notice: before to attach the software, make sure you first end the subsequent measures.
Move two: after end download Creader VI update application, the update application will firstly install, and USB drivers application instantly installation follows, please wait a couple of times the USB drivers application set up needs a while to finish.
Action three: if you see the home windows reveals "windows are unable to verify the publisher of the driver software", click on and select "Install driver computer software anyway".
Once the drivers have completed setting up join the software to any USB port.
The USB motorists ought to set up mechanically.
Phase four: correct install is finish once the "ZhiYuan USB Device" shows beneath the system supervisor as being the follows, this means
You have configured Launch Creader VI motorists properly and then run the software update resource to update the Creader Vi
Take note: Troubleshooting Creader Vi driver install.
For those who simply cannot see the resource showing while in the updated program and located no hardware during the computer software plan, then you definately should do such as this:
1. connect the tool to your USB port.
2. Open machine supervisor.
In case you have linked the device right before putting in the software package then you really will see "unknown device" in gadget supervisor.
3. Right simply click unknown unit and pick uninstall
4. Once the motorists have uninstalled then disconnect the device within the USB.
5. Reconnect the software after which the right drivers really should put in immediately
Additional Launch X431 resources juse pay a visit to on www.eobd2.net/